Bohemia 3 released
29.03.2025
The Bohemia 3 scenery is the first of the scenery created specifically for Condor 3. The objects are created using modified autogen, with manual addition of bridges, churches, chimneys, towers, castles and other objects. Cities and airports are now in real terrain, without the need to level it. All airports have been redesigned and modified. The scenery also includes complete high-voltage lines and cable cars. It was created completely new from the area you know from Bohemia 2. The scenery contains 70 airports.
A big thank you to Luboš and Erik for their help with the scenery. You can also download the intro images for the scenery and the data for Xsoar from Virtualsoaring.eu
Condor patch 3.0.5
26.03.2025
Patch 3.0.4 and Astir CS
21.03.2025Patch 3.0.4
The fourth patch for Condor 3 has been released along with the Astir CS glider.
The main improvements are:
- Radio and multicrew audio are louder.
- changing volume of audio devices supported during flight.
- extra security data added to flight tracks: format is different in 3.0.4.
- circling polars can now be shown in flight planner.
- SF28 updated trimmer animation
- New stick logic. Stick still works when hand is not on it.
Slovakia 2.1 patch
05.02.2025Slovakia 2.1 released
The Slovakia 2.1 scenery update has been released. The patch has an improved heat map. It must be installed in order to fly in multiplayer.
Hangar Update 3, ASK13
31.01.2025Hangar update 3 & ASK 13
A hangar update has been released with the ASK 13 glider. It is required to install it in order to fly in multiplayer, even if you do not want the new glider. Some other aircraft have also been modified.
Patch 3.0.3 and ASG32
24.12.2024Patch 3.0.3
The third patch for Condor 3 has been released together with the ASG32 Mi glider.
Merry Christmas
21.12.2024Until 31.12.2024 you have the last chance to buy the scenery you own for Condor 2, with a 50% discount Customers who bought Condor 2 after 1.9.2023 have the opportunity to apply for a Condor V3 license for free until 31.1.2025
Condor patch 3.0.2
11.12.2024Patch 3.0.2
The second patch for Condor 3 has been released.
- fixed mountain thermals do not form at low sun and ridges parallel to the sun
- SF28 motorglider available to buy
- disabled manual rudder corrections of auto rudder to remove autorudder advantage over manual rudder
- turbulence more progressive now, naming in flight planner changed
- trimmer is immediately changed, the hand follows
- the flight computer computes glide to the top of the start sector
- fixed error when joining a flight from serverlist if you dont have the landscape
- fixed disconnect causes open audio connection
- improved wind calculation algorithm on the ground
- fixed selecting weatherzone other than 0 unlocks wave tab in weather settings
- fixed AAT scoring
- fixed sloped runways cause tow issues
- fixed multiplayer selflaunching not working correctly
- fixed StemmeS12 bugsurface wingflex
- after finishing the task, resetting the flight track no longer possible
- fixed at the start of aerotow the rope break even with the probability set to 0%
- fixed pressing H with thermal helpers disabled causes FPS drop
- LXSim is updated, separated 1 minute wind arrow & live wind arrow
- spectate crash bug fixed
- spectate outputs scoreboard in json file format
- fixed JS3 bugwiper control in wrong position
- fixed incorrect altitude display of zone altitude limits on PDA
- fixed DuoDiscusFES: Front seat radio display not correct
Condor patch 3.0.1
18.11.2024Patch 3.0.1
The first patch for Condor 3 has been released.
Condor update 3.0.1 is available for download!
In addition to some important bug fixes and improvements, many small issues have been addressed:Code bugfixes:
Multiplayer clients can disable airspace in the flightplannerFixed ballast can be selected in clubclass on multiplayer servers
Sticktrim enabled with trimmer on axis causes the trim to get stuck
FLARM collision warning is 90 degrees off on LX9070
Multicrew audio and Radio volume too low
Cheat protection triggers with 50kg/m^2 on EB29R
Race in time of 60 minutes shows up as 1 minute in GUI when a flightplan is loaded
Multicrew audio in flight planner crashes Condor in certain scenarios
Code improvements:
Speed to fly chevrons added to LX varios (checkbox in Setup -> Options)Airspace warnings on Condor flight computer now display lower/upper airspace limits
Optimizations of the thermals code
Improvements of stability and performance on AMD CPUs
AHRS option enabled on LX9070
Chile added to the list of countries
Planes and landscape fixes and improvements:
DuoDiscusFES rear seat imperial altimeter obscuredASW20 bugs only showing on left wing
ASW19/ASW20/ASW28/ASG29/ASG29Es waterhandles inverted
Radio added to rear seat of Arcus/ASK21/DuoDiscus/DuoDiscusFES
Landscape patches updated to fix cheat protection triggering
Corrected lighting of static objects at LesceBled
Condor 3 is coming
29.10.2024Coming Condor V3
Condor V3 follows on from the previous version, which uses DirectX 11. Performance requirements are almost the same as for V2, only a graphics card with a larger memory - 3GB or more is recommended. Sceneries from V2 are not directly compatible with the old version, but license keys of aircraft purchased from V2 are also valid for V3. Condor V3 includes gliders: Antares 18S, Blaník L-13, Diana-2, Duo Discus XL, Genesis 2, Grunau Baby, Standard Cirrus. ASW-28. Other aircraft are available separately.
Key news
- new, significantly expanded scenery of Slovenia with phototextures and objects
- airports may now not have flat, level terrain
- two pilots can fly together in a glider and from both seats
- innovated and improved weather system, including moving fronts, rain and thunderstorms
- real spaces of CTR, TMA and zones
- flying computer LX9070
- direct voice connection between pilots without Teamspeak
Technical requirements:
A computer with an Intel 5/7 class processor with Windows 10/11 with at least 8GB of memory, a dedicated graphics card with at least 2GB of memory. Only gaming laptops with a dedicated graphics card can be used. On computers where Condor V2 worked well for you, Condor V3 should also work without problems.
In case of doubts or questions, please contact us before purchasing, the license is invalidated at the time of purchase and cannot be returned.
Hangar
This product is free to download and adds currently available aircraft to Condor. It is updated every time a new aircraft is released. After installing it, you can see all the planes correctly in Condor, only the ones you did not buy, you can not fly.
Always download the currently available files which are freely available here - the Hangar product is sometimes downloaded and replaced by the current Condor patch. License keys of aircraft purchased from V2 also apply to V3
XC version
XC version extends the standard version of Condor 3.0 with the intelligent LX Hawk S100 vario, insect leading edge wipers, FLARM targets and real wind indication.
The standard e-vario is replaced by a computerized LX Hawk S100, which gives more flight information.
For selected aircraft, it is possible to activate bugwipers, which clean the leading edges of the wings from insects during flight and thus improve the planes glide.
Bargain prices
License keys of aircraft purchased from V2 also apply to V3
The manufacturer gives customers who purchased Condor V2 from 1th September 2023 a free Condor V3 license key. Customers who purchased Condor V2 during this period on our site, can ask us about free V3 license
Customers who have purchased any of our sceneries since 1th July 2024 will find licenses for these new sceneries for V3 already ready in their account free.
All customers who purchased any of our Condor V2 scenery can purchase these V3 scenery with a 50% discount. The offer is limited in time.
